Tri-Frame Compact Stand Structure (long)
The Tri-Frame Compact Stand Structure (long) is a modular system designed for the freestanding installation of LED walls. It is supplied as a complete set and includes all components required for a full unit: a stable base plate (basement), two long outriggers for tilt stability, and the corresponding bolts. The Tri-Frames themselves are not included in the set and must be purchased separately. The system can be expanded at any time with additional components or adapted flexibly to different installation scenarios.
With an outrigger length of over two meters, the structure generates greater leverage, allowing it to operate with less ballast as the load is distributed more effectively. The system supports installation heights of up to 5.29 meters outdoors and up to 6.29 meters indoors. Structural safety verifications in the form of calculated static reports are available for both application areas. For outdoor setups exceeding 5 meters in height, an appropriate inspection book is also available.
Kompakt-Ständerwerk (lang)
From a standing start. A little more length, a little less weight. Height? Up to 5.29 meters outdoors! Where can it be used? Anywhere! Just right when the LED wall is getting bigger and the construction still needs to remain slim.
When purchasing a Tri-Frame Compact Stand Structure (short), you will receive the following components as standard:
| Ständerwerk Basement | 615,00€ | (0 pcs) | |
| Ständerwerk Ausleger (kurz) | 215,00€ | (0 pcs) | |
| Ständerwerk Bolzen mit R-Clip (132mm) | 26,50€ | (92 pcs) | |
| Ständerwerk Bolzen mit R-Clip(83mm) | 18,50€ | (40 pcs) |
Spare Parts
Something got damaged or misplaced? No problem at all! You can reorder all required spare parts here whenever needed:
| Tri-Frame R-Clip (3mm) | 0,55€ | (0 pcs) |
Accessoires
The following products are not included as standard in the Tri-Frame Compact Stand Structure (short) and can be purchased separately:
| Tri-Frame - 1 Meter | 425,00€ | (75 pcs) | |
| Tri-Frame - 0.848 Meter | 395,00€ | (0 pcs) | |
| Tri-Frame - 0.5 Meter | 265,00€ | (0 pcs) | |
| Tri-Frame Multiplatte | 185,00€ | (40 pcs) | |
| Tri-Frame Versteifungsprofil | 42,50€ | (9 pcs) |
Extensions
The Tri-Frame Compact Stand Structure (short) is a modular system that can be optionally expanded with additional accessories. This allows you to adapt your setup flexibly and individually to your specific requirements. Would you like to upgrade your set to a Tri-Frame Compact Stand Structure (long)? You can do so by adding the corresponding outriggers. An upgrade to the Standard Stand Structure is also possible with the appropriate components:
| Ständerwerk Ausleger (lang) | 275,00€ | (39 pcs) | |
| Ständerwerk Stütze (fest - 1/2) | 235,00€ | (28 pcs) | |
| Ständerwerk Stütze (variabel - 2/2) | 315,00€ | (28 pcs) | |
| Ständerwerk Stützanschluss (unten) | 130,00€ | (25 pcs) | |
| Ständerwerk Stützanschluss (oben) | 150,00€ | (29 pcs) | |
| Ständerwerk Verbinder - 1 Meter | 115,00€ | (0 pcs) | |
| Ständerwerk Verbinder - 0.5 Meter | 95,00€ | (63 pcs) | |
| Ständerwerk Verbinder - 0.0 Meter | 80,00€ | (31 pcs) | |
| Ständerwerk Prüfbuch | 4.450,00€ | (0 pcs) |
Alternatives
Do you require setups with greater outreach or higher stability requirements? Then you may also want to explore our other stand structure variants:
Kompakt-Ständerwerk (lang)
From a standing start. A little more length, a little less weight. Height? Up to 5.29 meters outdoors! Where can it be used? Anywhere! Just right when the LED wall is getting bigger and the construction still needs to remain slim.
*Prices do not include the legally applicable value added tax.
Order & return
The indication of the VAT identification number (VAT-No.) proves the entitlement to a tax-free intra-community delivery to another EU country. In the event that a tax identification number can not be presented, the purchase must be made via the German partner shop and the legally applicable value added tax must be added. Shipping is only to EU member states.
Right of withdrawal with LEDTEK. Wrong product, missing function or it simply does not meet your expectations. No problem! For all NovaStar products we grant you a 14-day right of withdrawal. Even as a commercial customer you have a right – no ifs or buts. Please make sure that the goods are returned to us in the original packaging, with all accessories supplied and without any signs of use! You can find all conditions regarding the contractual right of withdrawal here
Returns at LEDTEK. You would like to return an article purchased from us? No problem. With just a few clicks you can get your return on its way – no matter whether it is a revocation, a complaint or transport damage. Send us an email or call us, we will be happy to help you with your return.
The offer is directed exclusively to commercial customers and is subject to change. LEDTEK cabinets can ́t be used in other than private households. Errors and changes reserved.